Washer ZS 4041 ZM-60/60A

Washer ZS 4041 of the Front Travel ZM-60/60A

The washer ZS 4041 is a fixing element in the design of the wheel assembly of the classic front travel of the ZM-60/60A grain loaders. In the general scheme, it is installed between the hub ZPT 1007 and the cover ZS 4040, acting as a thrust barrier. Located directly between the roller bushing and the protective outer cover, this washer limits the axial displacement of the bushing during the rotation and maneuvering of the wheel. It also takes on lateral loads, fixes the bearing assembly (bushings), and reliably protects the thin metal dust cover from being rubbed through from the inside.

Features and Associated Parts of the Washer ZS 4041

• Catalogue number: ZS 4041
• Purpose: Fixing the bushing and protecting the hub cover
• Material: High-quality carbon steel (St. 3ps)
• Part weight: 0.038 kg
• Quantity per unit: 2 pcs.

Over time, due to the constant end-face friction of the roller bushing during lateral loads on the wheel, the plane of the washer can wear out, thin, or deform. Usually, its condition is checked during scheduled maintenance of the hub or when replacing bearings/bushings.

To ensure the correct and durable operation of the entire wheel assembly without play, it is always advisable to replace this washer in conjunction with the following adjacent parts:

• Roller bushing (32x48x65)
• Outer dust cover ZS 4040
• Hub ZPT 1007

In addition to installing standard components, the repair of the wheel assembly can be combined with local modernization - for example, using a durable ceramic bushing instead of the classic roller one, which significantly reduces the friction coefficient. If you seek to more radically solve the problem of undercarriage wear, the best step would be to switch to the modern two-wheel front travel of our production. In this updated design, the need for the washer ZS 4041 and the stamped cover ZS 4040 completely disappears - they are replaced by another protection system, where a modernized washer performs the function of a dust cover and is securely fastened with bolts directly to the axle itself, which completely eliminates the risk of axial play and significantly simplifies maintenance.

Buy the Hub Washer ZS 4041 for ZM-60

To ensure the long-lasting operation of the undercarriage of your grain loader and prevent premature wear of the hub bushings, order high-quality components at the Zavod Moroza. We manufacture ZS 4041 washers strictly maintaining the required metal thickness, which guarantees a reliable stop for the bushing and protection of the outer cover from friction.

With us, you can purchase both individual small fixing elements (washers, covers, bushings, retaining rings) and fully ready-to-install hubs or assemblies, which will significantly speed up the repair process. Contact our managers to quickly place an order, and we will promptly ship all the necessary parts for the high-quality restoration of your equipment.