Bevel Gear Wheel for ZM-60 Drive Reducer (ZM 07.603) Z=28

Bevel Gear Wheel for ZM-60 Drive Reducer (ZM 07.603) Z=28

The bevel gear wheel with catalog number ZM 07.603 is used in the drive reducer (self-propulsion mechanism ZP 07.000) of ZM-60 grain throwers and their modifications.

The bevel gear wheel (ZM 07.603) is a steel gear that is an important part of the grain thrower's drive reducer. Its main task is to transmit torque at an angle inside the reducer, ensuring the transmission of motion to the output shaft, which drives the wheels.

Structurally, it is a part made of Steel 45 with a cylindrical hub and a conical toothed rim, on which 28 teeth (z=28) are cut. The hub has a bore for the shaft with a keyway, as well as a hole for axial fixation (set screw). Wear of this gear's teeth leads to incorrect operation of the drive reducer, noise, and loss of traction.

Technical specifications of the bevel gear wheel ZM 07.603:

• Catalog number: ZM 07.603
• Number of teeth: z=28
• Material: Steel 45
• Weight: 0.9 kg
• Quantity per unit: 2 pcs.
• Country of manufacture: Ukraine

Buy Bevel Gear Wheel ZM 07.603 at Zavod Moroza

The bevel gears of the reducer operate under difficult conditions. When replacing this part, it is recommended to check the condition of the shafts, bearings, and other gears in the assembly. At Zavod Moroza, you can purchase all the necessary components:

• Bevel gear wheel ZM 07.603 (z=28)
• Half-shaft ZM 07.606
• Bushing ZA 07.101 and ZM 07.105
• Other gears, wheels, and sprockets of the reducer
• Bearings, keys, fasteners

The status of a direct manufacturer of agricultural equipment allows Zavod Moroza to offer various options for components of grain throwers of all modifications and generations, as well as guarantee their quality and dimensional compliance. We maintain a constant stock of the most common spare parts and provide professional consultation and prompt shipment throughout all of Ukraine.

If you are not sure which specific gear you need - contact us! Our experienced specialists will help identify your modification and select the correct part so that your grain thrower can get back to work as quickly as possible.