Transporter scraper of grain thrower ZM-60 L=8.17

Set of Scraper Conveyors (Chains) for OVS-25 (2 x 08.105.000 + 2 x 01.189.000)

Scraper conveyors are used as transport chains with scrapers on OVS-25 grain cleaning machines and their modifications.

This set is intended for the complete replacement or major overhaul of the entire transport system of the OVS-25 grain cleaner. It includes all four scraper chains responsible for moving grain within the machine.

Over time, as a result of intensive work and abrasive wear, the chains stretch, and the scrapers wear down, which leads to a drop in productivity and an increase in grain loss. Replacing all conveyors with a complete set ensures the ideal compatibility of new parts, the correct operation of the drives, and the restoration of the machine's factory specifications.

Composition of the OVS-25 Scraper Conveyor Set:

The set consists of four conveyors (chains with scrapers), which have the same chain pitch t=38 mm (TRD-38-4300) and scraper size 160x90 mm:

1. Loading Conveyor (long, vertical) - 1 pc.
   • Catalog number: 08.105.000
   • Length: 8.474 m
   • Number of scrapers: 28 pcs.
2. Unloading Conveyor (long, vertical) - 1 pc.
   • Catalog number: 08.105.000
   • Length: 8.474 m
   • Number of scrapers: 28 pcs.
3. Feeder Conveyor (short, horizontal) - 2 pcs.
   • Catalog number: 01.189.000
   • Length: 4.826 m
   • Number of scrapers: 16 pcs. (on each)

Pay attention to the modification

OVS-25 machines were produced by different factories over many years, so the design of the conveyors can have significant differences. Depending on the generation and manufacturer, the size and number of scrapers may vary (standard 160x90 mm, but others exist), the total chain length (e.g., 8.47 m or 8.17 m), and either a standard or reinforced type of chain may be used.

Zavod Moroza has all common options in stock, but to guarantee full compatibility, we recommend consulting with our specialists before ordering to clarify the parameters of your machine.

Buy the OVS-25 Conveyor Set at Zavod Moroza

Purchasing a complete set of conveyors is the most rational solution during a major machine overhaul, as it ensures even wear and ideal compatibility of all drive components. At Zavod Moroza, you can purchase the complete set, as well as each conveyor or chain separately. We also have all related parts for repair in stock:

• Drive and tensioning sprockets for conveyors
• Scrapers and planks (separately)
• Shafts, sprockets, bearing units, and fasteners

As a direct manufacturer of grain cleaning machines, Zavod Moroza knows the OVS-25 design and its modifications perfectly. We guarantee that our spare parts precisely meet all technical requirements and mounting dimensions. We maintain a constant availability of parts in stock and ensure prompt shipment throughout Ukraine, so your equipment does not stand idle.

If you are not sure if this set will fit, or if you need a consultation regarding your machine's modification - contact us! Our specialists will help you select the right components for the flawless operation of your OVS-25.