Inclined Chamber Conveyor for ZM-60 (ZP 02.060) 8.17 m

Inclined Chamber Conveyor for ZM-60 (ZP 02.060) 8.17 m

The inclined chamber conveyor for the ZM-60, with catalog number ZP.02.060, is used in the loading conveyor assembly of the ZM-60 (ZP 02.000) and its modifications.

Structurally, it is a scraper chain conveyor, or conveyor chain, consisting of a traction chain with appropriately sized scrapers attached to it. It moves inside an inclined metal housing (inclined chamber / elevator), lifts the grain mass from the machine's intake section (where it is supplied by the feeders) upwards, and unloads it into the trimmer's receiving chamber for subsequent throwing.

Technical specifications of the ZP 02.060 scraper conveyor:

• Catalog number: ZP.02.060
• Chain type: PR-38 (38 mm) or PR-38.1
• Chain length: 8.17 m
• Number of chains per unit: 1 pc.
• Number of scrapers: 36 (may vary depending on the modification)
• Scraper size: 250x100x10 (may vary depending on the modification)
• Country of manufacture: Ukraine

Buy the Central Loading Conveyor for ZM-60 at Zavod Moroza

Here you can purchase the ZP 02.060 conveyor chain for the ZM-60, as well as for the ZM-90 and ZM-120, which differ in chain design and scraper size. You can also buy other related parts for the repair of this assembly:

• Conveyor chain ZP 02.060 (8.17 m)
• Scraper assemblies (N 107.050 or others)
• Drive sprocket ZS 1038 (z=12)
• Drive sprocket H.023.211-02 (z=10, t=38)
• Feeder chains ZP.02.090 (4.75 m)
• Shafts, bearings, and fasteners

Grain throwers have been produced over many years by various manufacturers, and over time, changes were made to their design. Therefore, components for conveyors of different generations or manufacturers may vary.

For example, the scrapers themselves can be different (300 or 250 mm) as can their quantity, a reinforced chain with a non-standard pitch may be used, and the total circuit length could be 8.4 meters instead of 8.17 m. The drive and tensioning sprockets also sometimes differ.

Therefore, to guarantee that you receive a part that will perfectly fit your equipment, we strongly recommend clarifying the main parameters of your conveyor (length, chain pitch, scraper width) or consulting with our specialists before ordering.

As a direct manufacturer of grain throwers, Zavod Moroza has experience with various modifications of this equipment and maintains a full range of spare parts for all versions and generations in stock. We understand that equipment downtime, especially during the high season, is unacceptable, which is why we guarantee prompt processing and shipment of your orders to any point in Ukraine.

Contact our managers! They will provide professional consultation, help to accurately identify the necessary spare part even if you do not know all the parameters, and arrange for its fast delivery. Our goal is to get your equipment back to work as quickly as possible.